Mixing Zr Xenpaks With Other Types; Summit Xgm2-2Xn Option Card - Extreme Networks Summit X150 Series Hardware Installation Manual

Mixing ZR XENPAKs with Other Types

Table 31 lists the supported combinations of XENPAK types using ZR XENPAKs in a Summit X450
series switch. You can either install one ZR XENPAK and leave one slot empty or install one ZR
XENPAK and one SR XENPAK; the Summit X450 series switch does not support any other XENPAK
combinations when a ZR XENPAK module is installed. You must put the specified modules in the
specified slots, as shown in
.
Table 31: Summit X450 ZR XENPAK Combinations
Left Slot
ZR XENPAK
ZR XENPAK

Summit XGM2-2xn Option Card

The Summit XGM2-2xn option card allows you to add up to two 10-gigabit XENPAK modules to the
following switches:
Summit X450a-24t switch, running ExtremeXOS 11.5.0 (or later)
●
Summit X450a-24tDC switch, running ExtremeXOS 11.5.0 (or later)
●
Summit X450a-24x switch, running ExtremeXOS 11.6.1 (or later)
●
Summit X450a-24xDC switch, running ExtremeXOS 11.6.1 (or later)
●
Summit X450a-48t switch, running ExtremeXOS 11.5.0 (or later)
●
Summit X450e-24p switch, running ExtremeXOS 11.5.0 (or later)
●
Summit X450e-48p switch, running ExtremeXOS 11.6.1 (or later)
●
The Summit XGM2-2xn option card is compatible with the following 10-gigabit XENPAK modules:
SR XENPAK module, operating in the 850 nm range
●
LR XENPAK module, operating in the 1310 nm range
●
ER XENPAK module, operating in the 1550 nm range
●
ZR XENPAK module, operating in the 1550 nm range
●
LX-4 XENPAK module, operating in the 1269-1355 nm range
●
LW XENPAK module, operating in the 1310 nm range
●
Figure 167 shows the Summit XGM2-2xn option card.
Summit Family Switches Hardware Installation Guide
Table 31, for the switch to discover the ZR XENPAK correctly.
Right Slot
Empty
SR XENPAK
197