Extreme Networks Summit X150 Series Hardware Installation Manual page 26

•
LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see
•
Stack number indicator showing the position of this switch in a stacked configuration
•
Serial console port used to connect a terminal and perform local management
Figure 13: Summit X250e-24x Switch Front Panel
The rear panel of the Summit X250e-24x switch (shown in
Panel on page 26) includes:
•
Ethernet management port with associated LEDs
•
Two high-performance stacking ports with associated LEDs
•
Redundant power input connector for use with the EPS-160 External Power Module
The connecting redundant power supply cable is shipped with the EPS-160 unit. See
External Power Module (with EPS-T)
•
AC power input socket
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 14: Summit X250e-24x Switch Rear Panel
Summit X250e-24xDC Switch
The front panel of the Summit X250e-24xDC switch includes:
•
Twenty-four 100BASE-FX ports (ports 1–24) that provide 2.4 Gbps of high-density fiber
connectivity
•
Two combination ports (ports 25–26) using RJ-45 connectors and SFPs to provide 2 Gbps of
copper or fiber connectivity
For more information about combination ports, see
Summit Family Hardware Installation Guide
Summit X250e Series Switch
Figure 14: Summit X250e-24x Switch Rear
for more information.
Combination Ports and
Summit Family Switches
LEDs.
EPS-160
Failover.
26