Extreme Networks Summit X150 Series Hardware Installation Manual page 283

4 At the rear of the rack or cabinet, for each side, slide the rear mounting brackets (rails) between the
two rows of pegs on either side of the switch.
Figure 265: Inserting the Rear Mounting Brackets Between the Pegs on the Side of
the Switch
5 Secure the rear mounting brackets to the rack posts using suitable screws. Be sure that the switch is
level.
6 Ground the switch if grounding lug is present (X670 series switches).
a Strip 0.25 inch from the end of the AWG # 14 copper wire.
b Securely crimp the provided ring terminal onto the stripped wire.
Summit Family Hardware Installation Guide
Installing Summit Family Switches
283