Summit Xgm2-2Xf Option Card - Extreme Networks Summit X150 Series Hardware Installation Manual

Figure 124: Summit XGM2-2xn Option Card
In Summit X450a and X450e series switches, the ports on the XGM2-2xn option card can be configured
as alternate stacking ports in a SummitStack configuration that uses the SummitStack-V feature. For
more information about stacking Summit family switches, see
For current information about compatible XENPAK modules and the minimum required software, refer
to the most recent version of the ExtremeXOS Hardware and Software Compatibility Matrix.
For information about XENPAK modules, refer to the Extreme Networks Pluggable Interface Modules
Installation Guide.
Note
Standards-based CX-4 XENPAKs are also recognized by ExtremeXOS; contact your CX-4
module vendor to obtain these.

Summit XGM2-2xf Option Card

The Summit XGM2-2xf option card allows you to add one or two 10-gigabit XFP modules to the
following switches:
•
Summit X350 series switch, running ExtremeXOS 12.1.2 (or later)
•
Summit X450a-24t switch, running ExtremeXOS 11.5.0 (or later)
•
Summit X450a-24tDC switch, running ExtremeXOS 11.5.0 (or later)
•
Summit X450a-24x switch, running ExtremeXOS 11.6.1 (or later)
•
Summit X450a-24xDC switch, running ExtremeXOS 11.6.1 (or later)
•
Summit X450a-48t switch, running ExtremeXOS 11.5.0 (or later)
•
Summit X450e-24p switch, running ExtremeXOS 11.5.0 (or later)
•
Summit X450e-48p switch, running ExtremeXOS 11.6.1 (or later)
•
Summit X450e-24t switch, running ExtremeXOS 12.5.1 (or later)
•
Summit X450e-48t switch, running ExtremeXOS 12.5.1 (or later)
The following figure shows the Summit XGM2-2xf option card.
Summit Family Hardware Installation Guide
Summit Option Cards and Versatile Interface Modules
Summit Family Switches.
140