Extreme Networks Summit X150 Series Hardware Installation Manual page 210

•
Ground the switch (DC-powered units only).
•
Connect a redundant power supply (if applicable).
•
Connect power cables.
•
Connect network interface cables.
If you are installing Summit family switches for use in a SummitStack configuration, read
Family Switches before you install the switches.
For information about installing port option cards, see
For information about grounding and connecting DC-powered Summit family switches, see
Summit DC-Powered
For information about installing and connecting redundant power supplies, see
Supplies.
Rack-Mount a Summit Switch (Models Other than Summit X430-8p, X460,
X480, X650, and X670 Series)
This section describes how to install Summit switch models other than the Summit X460, X480, X650,
and X670 series switches.
The following items are provided with the Summit switch:
•
Mounting brackets
•
Screws to secure the mounting brackets to the switch
•
Eight M3 screws for Summit X350, X440, X450, X450a, and X450e series switches
•
Twelve M4 screws for Summit X150 and X250e series switches
•
Four rubber mounting feet for table top stacking
To install the switch in a rack, you need the following additional tools and equipment:
•
Four rack mounting screws
The screw size will vary based on your organization's rack system; screws are not provided.
•
Screwdriver for securing the switch to your organization's rack
The screwdriver size will vary based on the requirements of your organization's rack system.
•
AC power cord
An AC power cord is not included with the Summit family switch. You must obtain a power supply
cord that meets the requirements listed under
and AC Power Supplies.
To rack-mount a Summit switch:
1 Place the switch upright on a stable work surface.
2 Place a mounting bracket over the mounting holes on one side of the unit.
3 Insert the screws and fully tighten with a suitable screwdriver.
Summit Family Hardware Installation Guide
Switches.
Installing Summit Family Switches
Installing Optional Ports.
Power Cord Requirements for AC-Powered Switches
Summit
Installing
Summit Power
210