Extreme Networks Summit X150 Series Hardware Installation Manual page 480

Table 408: Power Specifications
Voltage input range
Nominal input ratings
Nominal input current at full loads
Line frequency range
Maximum inrush current
Output
Power supply input socket
Power cord input plug
Power cord wall plug
Power supply cord gauge
Efficiency
Table 409: Environmental Specifications
Operating temperature
Storage temperature
Operating humidity
Operational shock
Summit 450 W DC Power Supplies
The following tables list the specifications of the DC power supplies for use with the Summit X480-24x,
X480-48x, and Summit X480-48t:
Table 410: Physical Specifications
Dimensions
Weight
Table 411: Power Specifications
Nominal Input
DC Voltage Input Range
Summit Family Hardware Installation Guide
90 to 264 V
100 to 240 V , 50 to 60 Hz, 8 A
12 A @ 90 V (low-line)
5 A @ 230 V (high-line)
47 to 63 Hz
15 A
12 V , 37 A max, 450 Watts
3.3 V , 3 A max, 9.9 Watts
Maximum continuous DC output shall not exceed 450 Watts.
IEC 320 C14
IEC 320 C13
Refer to Power Cord Requirements for AC-Powered Switches and AC
Power Supplies.
2
18 AWG (0.75 mm ) up to 6 feet or 2 meters
or
2
16 AWG (1.0 mm ) over 6 feet
84% typical at full load, high line
0°C to 45°C (normal operation)
-40°C to 70°C
20% to 90% relative humidity, non-condensing
2
30 m/s (3 G)
Height: 1.5 inches (3.8 cm)
Width: 3.1 inches (7.8 cm)
Depth: 13.3 inches (33.8 cm)
3.22 lb (1.46 kg)
–48 to –60 V , 24 A
–40 to –75 V
Technical Specifications
480