Extreme Networks Summit X150 Series Hardware Installation Manual page 367

1 Verify that all power supplies have been removed from the switch.
2 Support the switch while you remove the rack-mounting screws holding the front mounting
brackets in place against the rack post.
3 Slide the switch out of the rack.
Figure 355: Removing a Front-Mounted Switch from a Two-Post Rack
Removing a Switch from a Four-Post Rack
Removing the Summit X480 switch from a cabinet or four-post rack requires two people to maneuver
the switch and disconnect the mounting hardware.
To remove the Summit X480 series switch from a cabinet or four-post rack:
1 Verify that all power supplies have been removed from the switch.
2 Support the front of the switch while you remove the front rack mounting screws.
Summit Family Hardware Installation Guide
Removing a Summit Family Switch from a Rack
367