Summit Xgm2-2Xn Option Card - Extreme Networks Summit X150 Series Hardware Installation Manual

Summit Option Cards and Versatile Interface Modules

Summit XGM2-2xn Option Card

The Summit XGM2-2xn option card allows you to add one or two 10-gigabit XENPAK modules to the
following switches:
Summit X350 series switch, running ExtremeXOS 12.1.2 (or later)
●
Summit X450a-24t switch, running ExtremeXOS 11.5.0 (or later)
●
Summit X450a-24tDC switch, running ExtremeXOS 11.5.0 (or later)
●
Summit X450a-24x switch, running ExtremeXOS 11.6.1 (or later)
●
Summit X450a-24xDC switch, running ExtremeXOS 11.6.1 (or later)
●
Summit X450a-48t switch, running ExtremeXOS 11.5.0 (or later)
●
Summit X450e-24p switch, running ExtremeXOS 11.5.0 (or later)
●
Summit X450e-48p switch, running ExtremeXOS 11.6.1 (or later)
●
Summit X450e-24t switch, running ExtremeXOS 12.5.1 (or later)
●
Summit X450e-48t switch, running ExtremeXOS 12.5.1 (or later)
●
Figure 77 shows the Summit XGM2-2xn option card.
Figure 77: Summit XGM2-2xn Option Card
For current information about compatible XENPAK modules and the minimum required software, refer
to the most recent version of the ExtremeXOS Release Notes.
For information about XENPAK modules, refer to the Extreme Networks Pluggable Interface Modules
Installation Guide.
NOTE
Standards-based CX-4 XENPAKs are also recognized by ExtremeXOS; contact your CX-4 module vendor
to obtain these.
108
SH_010
Summit Family Switches Hardware Installation Guide