Extreme Networks Summit X150 Series Hardware Installation Manual page 63

The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 62: Summit X440-48p Switch Rear Panel
1 = AC power input connector
2 = Stacking ports
Summit X440-48t-10G Switch
The front panel of the Summit X440-48t-10G switch includes:
•
Forty-eight fixed autosensing 10/100/1000BASE-T ports (ports 1–48) that provide 48 Gbps of high-
density copper connectivity
•
Two unpopulated SFP ports (ports 47 and 48) that provide 2 Gbps of fiber connectivity. The SFP
ports support both 100BASE-FX and 1000BASE-X optical modules.
Ports 47 and 48 are implemented as shared ports that pair a copper port with a fiber port. For more
information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation
Guide.
•
Two unpopulated SFP+ ports (ports 49 and 50) that provide 20 Gbps of fiber connectivity
•
Ethernet management port
•
Serial console port implemented as an RJ-45 connector, used to connect a terminal and perform
local management
•
LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see
Figure 63: Summit X440-48t-10G Switch Front Panel
Summit Family Hardware Installation Guide
3 = Redundant power connector
Combination Ports and Failover.
Summit X440 Series Switch
Summit Family Switches
LEDs.
63