Extreme Networks Summit X150 Series Hardware Installation Manual page 425

Table 189: Summit X450a-24x Power (continued)
Power supply cord type
Power supply input socket
Power cord input plug
Power cord wall plug
Power supply cord gauge
Efficiency
Heat dissipation
Power consumption
Table 190: Summit X450a-24xDC Power
Operational voltage range
Nominal input ratings
Input current
Inrush current
Input wire harness
Power supply input socket
Power cord input plug
Power cord wall plug
Power supply cord gauge
Heat dissipation
Power consumption
Table 191: Safety Standards
North American Safety of ITE
European Safety of ITE
International Safety of ITE
Summit Family Hardware Installation Guide
AC
IEC 320 C14
IEC 320 C13
Refer to Power Cord Requirements for AC-Powered Switches and AC
Power Supplies.
2
18 AWG (0.75 mm ) up to 6 feet or 2 meters
or
2
16 AWG (1.0 mm ) over 6 feet
80% with 60% to 100% load
80 W (273 BTU/hr)
80 W (273 BTU/hr)
–36 to –72 V
–48 V , 2.5 A
2.5 A @ -36 V (low-line)
1.25 A @ -72 V (high-line)
40 A peak maximum
Extreme Networks PN 250088
TYCO PN 206061-1
TYCO PN 206060-1
None provided
2
14 AWG (2.0 mm )
98 W (334 BTU/hr)
98 W (334 BTU/hr)
UL 60950-1:2003 1st Ed., Listed Device (US)
CSA 22.2#60950-1-03 1st Ed.(Canada)
Complies with FCC 21CFR 1040.10 (US Laser Safety)
CDRH Letter of Approval (US FDA Approval)
IEEE 802.3af 6-2003 Environment A for PoE Applications
EN 60950-1:2001+A11
EN 60825-1+A2:2001 (Lasers Safety)
TUV-R GS Mark by German Notified Body
73/23/EEC Low Voltage Directive
CB Report & Certificate per IEC 60950-1:2001 Country Deviations
AS/NZX 60950-1 (Australia /New Zealand)
Technical Specifications
425