Extreme Networks Summit X150 Series Hardware Installation Manual page 57

3 = SFP ports
4 = Stack number
The rear panel of the Summit X440-24p-10G switch
Panel on page 57) includes:
•
Redundant power input connector for optional connection to the EPS-C2 External Power Module
The connecting redundant power supply cable is shipped with the power module. See
EPS-C2 Chassis
•
AC power input socket
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 52: Summit X440-24p-10G Switch Rear Panel
1 = AC power input connector
Summit X440-24x-10G Switch
The front panel of the Summit X440-24x-10G switch includes:
•
Twenty-four unpopulated SFP ports (ports 1–24) that provide 24 Gbps of fiber connectivity. The
SFP ports support both 100BASE-FX and 1000BASE-X optical modules.
•
Ports 21 through 24 are implemented as shared ports that pair a copper port with a fiber port. For
more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation
Guide.
•
Four autosensing 10/100/1000BASE-T ports (ports 21–24) that provide 4 Gbps of high-density
copper connectivity.
These ports are implemented as shared ports that pair a copper port with a fiber port. For more
information about combination ports, see
•
Two unpopulated SFP+ ports (ports 25 and 26) that provide 20 Gbps of fiber connectivity.
•
Ethernet management port.
•
Serial console port implemented as an RJ-45 connector, used to connect a terminal and perform
local management.
•
LEDs to indicate port status and switch operating conditions.
For a description of the LEDs and their operation, see
Summit Family Hardware Installation Guide
for more information.
2 = Redundant power connector
7 = SFP+ ports
(Figure 52: Summit X440-24p-10G Switch Rear
Combination Ports and Failover
Combination Ports and Failover.
Summit X440 Series Switch
Summit Family Switches
Installing an
LEDs.
57