Installing An Option Card In Slot B Of A Summit X460 Series Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

1 Attach an ESD-preventive wrist strap to your bare wrist and connect the metal end to an
appropriate ground point on the rack.
2 At the back of the switch, remove the blank cover over slot A.
Figure 301: Removing the Slot A Cover
3 Carefully slide the XGM3 series port option card all the way into the slot (see the figure below).
4 Align and fully tighten the captive retaining screws.
Figure 302: Installing an XGM3-2sf Port Option Card
Installing an Option Card in Slot B of a Summit X460 Series
Switch
Slot B of a Summit X460 series switch accommodates either a Summit X460 stacking module or an
XGM3SB-4sf port option card
Summit Family Hardware Installation Guide
Installing Optional Ports
319