Extreme Networks Summit X150 Series Hardware Installation Manual page 316

3 Open the clip and slip it over the barrel of the connector.
Figure 298: Attaching the Power Cord Retainer on the 750 W AC Power Supply
4 Snap the clip firmly around the connector.
5 Connect the other end of the power cord to an AC power outlet.
Warning
Always be sure that the source outlet is properly grounded before plugging the AC power
cord into the AC power supply.
Caution
Make sure that the AC power supply circuit is not overloaded. Use proper over-current
protection, such as a circuit-breaker, to prevent over-current conditions.
Summit Family Hardware Installation Guide
Installing Summit External Power Supplies
316