Extreme Networks Summit X150 Series Hardware Installation Manual page 53

Figure 45: Summit X440-L2-24t Switch Front Panel
1 = Ethernet management port
2 = 10/100/1000BASE-T ports
3 = SFP ports
The rear panel of the Summit X440-L2-24t switch (shown in
Rear Panel on page 53) includes:
•
Redundant power input connector for optional connection to the EPS-C2 External Power Module
The connecting redundant power supply cable is shipped with the power module unit. See
an EPS-C2 Chassis
•
AC power input socket
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 46: Summit X440-L2-24t Switch Rear Panel
1 = AC power input connector
Summit X440-24p Switch
The front panel of the Summit X440-24p switch includes:
•
Twenty-four fixed autosensing 10/100/1000BASE-T PoE+ ports (ports 1–24). The Summit X440-24p
switch supports the PoE+ IEEE 802.3a standard and provides up to 30 Watts of power per port. This
switch provides a total switch PoE power budget of 380 Watts.
•
Four unpopulated SFP ports (ports 21–24) that provide 4 Gbps of fiber connectivity. The SFP ports
support both 100BASE-FX and 1000BASE-X optical modules.
Ports 21 through 24 are implemented as shared ports that pair a copper port with a fiber port. For
more information about combination ports, see
Summit Family Hardware Installation Guide
for more information.
2 = Redundant power connector
4 = Console port
5 = Combination ports
Figure 46: Summit X440-L2-24t Switch
Combination Ports and Failover.
Summit Family Switches
Installing
53