Extreme Networks Summit X150 Series Hardware Installation Manual page 162

Table 81: Extreme Networks Direct-Attach Cables
Cable Type
SFP+ passive copper cable
QSFP+ passive copper cable
QSFP+ active optical cable
QSFP+-to-SFP+ fan-out passive coppercable
RJ-45 Connector Jackets
Use RJ-45 cable with connector jackets that are flush with the connector or that have connectors with
a no-snag feature.
Using cable with jackets that are wider than the connectors can cause:
•
Connectors that are not properly aligned with the port.
•
Crowded cable installation, which can cause connectors to pop out of the port.
The following figure shows examples of connector jacket types that are not recommended as well as
those that are recommended.
Summit Family Hardware Installation Guide
Model Number Length
10304 1 meter
10305 3 meters
10306 5 meters
10307 10 meters
10311 0.5 meter
10312 1 meter
10313 3 meters
10323 5 meters
10315 10 meters
10316 20 meters
10318 100 meters
10321 3 meters
10322 5 meters
Site Preparation
162