Extreme Networks Summit X150 Series Hardware Installation Manual page 273

3 Carefully slide the power supply all the way into the power supply bay (see
850 W DC Power Supply
4 Push the power supply in until the latch snaps into place.
Caution
Do not slam the power supply into the switch.
Figure 253: Installing an 850 W DC Power Supply
5 To install more power supplies, repeat steps 2 though 4.
Connecting the Ground Cable
Warning
Be sure to connect the chassis ground wire before you connect any power cables.
Warning
Be sure to disconnect the ground wire after you disconnect all power cables.
To connect the ground wire:
1 Verify that the DC circuit is de-energized.
2 Identify the grounding point on the front panel of the power supply.
Figure 254: Connecting the Ground Wire
Summit Family Hardware Installation Guide
on page 273).
Installing Summit Family Switches
Figure 253: Installing an
SH_107
273