Extreme Networks Summit X150 Series Hardware Installation Manual page 41

1
MGMT
FAN
4
Figure 29: Summit X430-24t Switch Front Panel
1 = Ethernet management port
2 = 10/100/1000BASE-T ports
The rear panel of the Summit X430-24t switch (shown in
Panel on page 41) includes:
•
AC power input socket
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 30: Summit X430-24t Switch Rear Panel
1 = AC power input connector
Summit X430-24p Switch
The front panel of the Summit X430-24p switch includes:
•
Twenty-four fixed autosensing 10/100/1000BASE-T ports (ports 1–24) that provide 24 Gbps of
high-density copper connectivity.In addition, all of these ports (ports 1-24) also support the POE
protocol IEEE802.af and POE+ protocol IEEE 802.at standard. Using the POE protocol, the switch
can provide 15.4 Watts of power on a single port up to a total power budget of 370 Watts. Using the
POE+ protocol, the switch can provide 30 Watts of power on a single port up to a total power
budget of 370 Watts.
•
Four unpopulated 1000BASE-X SFP ports (ports 25–28) that provide 4 Gbps of fiber connectivity.
Note
All the twenty-four 10/100/1000BASE-T ports and all four of the 1000BASE-X SFP ports
can be used simultaneously.
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation
Guide.
•
Ethernet management port
Summit Family Hardware Installation Guide
2
25
26
27
28
X430- 24t
3
25 26 27 28
3 = SFP ports
4 = Console port
Figure 30: Summit X430-24t Switch Rear
1
0.75A
Summit Family Switches
41