Extreme Networks Summit X150 Series Hardware Installation Manual page 58

1
x
4 5
Figure 53: Summit X440-24x-10G Switch Front Panel
1 = Ethernet management port
2 = SFP ports
3 = 10/100/1000BASE-T ports
4 = Stack number indicator
The rear panel of the Summit X440-24x-10G switch includes:
•
Redundant power input connector for optional connection to the EPS-C2 External Power Module
The connecting redundant power supply cable is shipped with the power module unit. See
an EPS-C2 Chassis
•
AC power input socket
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 54: Summit X440-24x-10G Switch Rear Panel
1 = AC power input connector
Summit X440-48t Switch
The front panel of the Summit X440-48t switch includes:
•
Forty-eight fixed autosensing 10/100/1000BASE-T ports (ports 1–48) that provide 48 Gbps of high-
density copper connectivity.
•
Four unpopulated SFP ports (ports 45–48) that provide 4 Gbps of fiber connectivity. The SFP ports
support both 100BASE-FX and 1000BASE-X optical modules.
Ports 45 through 48 are implemented as shared ports that pair a copper port with a fiber port. For
more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation
Guide.
Summit Family Hardware Installation Guide
2
3
6 7
for more information.
2
5 = Console port
6 = Combination ports
7 = SFP+ ports
1
SH_284
2 = Redundant power connector
Combination Ports and Failover.
Summit Family Switches
Installing
58