Extreme Networks Summit X150 Series Hardware Installation Manual page 370

4 Push the latching tab to the left as you pull outward on the handle to disengage the power supply
internal connectors.
Figure 358: Removing a Summit X650 DC Power Supply
Removing a Summit X650 Series Switch from a Two-Post Rack
Removing the Summit X650 switch from a rack requires two people to maneuver the switch and
disconnect the mounting hardware.
Caution
Make sure that proper ESD controls are in use before maintenance is performed. This includes
but is not limited to wrist straps that are grounded to the switch chassis and earth grounds.
To remove the Summit X650 series switch from a two-post rack:
1 Verify that the power supplies have been removed from the switch.
Summit Family Hardware Installation Guide
Removing a Summit Family Switch from a Rack
370