Extreme Networks Summit X150 Series Hardware Installation Manual page 212

5 Slide the switch into the rack (see
Take care to load the rack so that it is not top-heavy. Start installing equipment at the bottom of the
rack and work up.
Do not cover vents that would restrict airflow. Leave half a rack space between the units for
adequate ventilation.
Figure 182: Installing a Switch in a Rack
6 Secure the switch with suitable screws (not provided).
7 Connect the power cables.
For AC-powered units, connect the power cable to the AC power connector on the back of the
switch. Then connect the power cable to an AC power socket.
For information about DC-powered units, see
8 Connect the switch to the redundant power supply (if applicable). For instructions to install and
connect redundant power supplies, see
Free-Standing and Desktop Mounting of Switches
Summit family switches are supplied with four self-adhesive rubber pads for desktop mounting.
Summit Family Hardware Installation Guide
Figure 182: Installing a Switch in a Rack
Installing Summit DC-Powered
Summit Power Supplies.
Installing Summit Family Switches
on page 212).
Switches.
212