Connecting The Ground Cable - Extreme Networks Summit X150 Series Hardware Installation Manual

Connecting the Ground Cable

Warning
Be sure to connect the chassis ground wire before you connect any power cables.
Warning
Be sure to disconnect the ground wire after you disconnect all power cables.
To connect the ground wire:
1 Verify that the DC circuit is de-energized.
2 Attach an ESD-preventive wrist strap to your bare wrist and connect the metal end to an
appropriate ground point on the rack.
3 Identify the grounding point on the front panel of the power supply (see
Supply to the DC Source
4 Insert a a 6-32 UNC screw (provided) through the ring terminal and into the grounding point on the
power supply.
5 Tighten the screw to 12.6 inch-pounds (1.42 Newton-meters).
6 Connect the other end of the wire to a known reliable earth ground point at your site.
Figure 213: Connecting the Ground Wire (Model 10934A)
1 = Grounding point
2
Figure 214: Connecting the Ground Wire (Model 10933)
Summit Family Hardware Installation Guide
Voltage).
1
Installing Summit Family Switches
Connecting the Power
2 = Ground wire
238