Extreme Networks Summit X430 Series Installation Notes
Hide thumbs
Also See for Summit X430 Series:
- Hardware installation manual (499 pages) ,
- Hardware installation manual (512 pages)
Table of Contents
Advertisement
Summit X430 Series Switches
Installation Note
Pre-installation Requirements
Before you install the Summit X430 series switch, read the information in
page
2.
The following items are provide with the Summit X430 series switch:
Mounting brackets
●
Eight M3 screws to secure the mounting brackets to the switch
●
To install the switch in a rack, you need the following additional tools and equipment:
Four rack mounting screws to match your equipment rack
●
Screwdriver to fit the rack mounting screws
●
AC power cord that is suitable for the current rating of this product (See
●
Supply Cords" on page
Required Tools
The following items are provided with the Summit X430 series switch:
Two rack mounting brackets adaptable for either a front-mount or mid-mount installation
●
Twelve screws for attaching the brackets to the switch enclosure
●
For DC models, spade terminal and M4 screw with captive washer for grounding the switch
●
You need the following additional tools and materials to install the switch in a rack:
#1 Phillips screwdriver
●
Four rack mounting screws to match your equipment rack
●
Screwdriver to fit the rack mounting screws
●
#14 AWG stranded copper cable for grounding the switch (DC powered models)
●
ESD-preventive wrist strap for installing optional ports at the back of the switch
●
Part Number: 120882-00 Rev. 02
4.
"Safety Information" on
"Selecting AC Power
1
Advertisement
Table of Contents
Related Manuals for Extreme Networks Summit X430 Series
Summary of Contents for Extreme Networks Summit X430 Series
- Page 1 Summit X430 Series Switches Installation Note Pre-installation Requirements Before you install the Summit X430 series switch, read the information in “Safety Information” on page The following items are provide with the Summit X430 series switch: Mounting brackets ● Eight M3 screws to secure the mounting brackets to the switch ●...
-
Page 2: Installing The Switch
6 Connect the other end of the power cable to an AC power socket. Safety Information WARNING! Read the safety information in this section before you install Extreme Networks products. Failure to follow this safety information can lead to personal injury or damage to the equipment. Summit X430 Series Switches Installation Note... -
Page 3: Considerations Before Installing
Failure to follow these instructions may damage the equipment or violate required safety and EMC regulations. The chassis cover should be removed only by Extreme Networks personnel. This system contains no ● customer-serviceable components. Repairs to the system must be performed by an Extreme Networks factory service technician. -
Page 4: General Safety Precautions
Selecting AC Power Supply Cords Extreme Networks does not include AC power input cords in the product box. To purchase a power cord for your product and for your specific country, contact your local Extreme Networks Channel Account Manager or Sales Manager, or purchase a cord from your local supplier. -
Page 5: Cable Routing For Lan Systems
● momentary increases or decreases in electrical power. Summit X430 series switches do not have switches for turning the unit on and off. Remove the wall ● plug from the electrical outlet to disconnect the power from a Summit X430 series switch. Make sure that this connection is near the equipment and is easily accessible for quick disconnect. -
Page 6: Battery Replacement And Disposal
WARNING! Fiber Optic Ports and Optical Safety The following safety warnings apply to all optical devices used in Extreme Networks equipment that are removable or directly installed in an I/O module or chassis system. Such devices include but are not limited to gigabit interface converters (GBICs), small form factor pluggable (SFP) modules (or mini-GBICs), QSFP+ modules, XENPAK transceivers, and XFP laser optic modules. - Page 7 Never alter, modify, or change an optical device in any way other than suggested in this ● document. GBIC, SFP (Mini-GBIC), QSFP+, XENPAK, and XFP Regulatory Compliance Extreme Networks pluggable optical modules and direct-attach cables meet the following regulatory requirements: Class 1 or Class 1M Laser Product ● EN60825-1:2007 2nd Ed. or later, European standard ●...
- Page 8 ● connectivity. Ports 21 through 24 are implemented as shared ports that pair a copper port with a fiber port. For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide. Ethernet management port. ● Serial console port implemented as an RJ-45 connector, used to connect a terminal and perform local ●...
- Page 9 Ports 49 through 52 are implemented as shared ports that pair a copper port with a fiber port. Ethernet management port ● Serial console port implemented as an RJ-45 connector, used to connect a terminal and perform local ● management Summit X430 Series Switches Installation Note...
- Page 10 X430 Series Switches X430 Series Switches The Summit X430 series includes the following switches: Summit X430-8p ● Summit X430-24t ● Summit X430-24p ● Summit X430-48t ● Table 1: Summit X430 Series Switch Technical Specifications Physical Dimensions Summit X430-8p switch Height: 1.73 inches (4.4 cm) Width: 8.7 inches (22.1 cm)
- Page 11 X430 Series Switches Table 1: Summit X430 Series Switch Technical Specifications (Continued) Power: Summit X430-24t Nominal input ratings 100 to 240 V , 50/60 Hz, 0.75 A Input current 0.40 A @ 110 V (low-line) 0.20 A @ 220 V...
- Page 12 Unified Access Architecture, Unified Access RF Manager, UniStack, XNV, the Extreme Networks logo, the Alpine logo, the BlackDiamond logo, the Extreme Turbodrive logo, the Summit logos, and the Powered by ExtremeXOS logo are trademarks or registered trademarks of Extreme Networks, Inc. or its subsidiaries in the United States and/or other countries.