Extreme Networks Summit X150 Series Hardware Installation Manual page 123

Table 68: Summit X450e Series Switches (continued)
Switch Model
Summit X450e-48p
Summit X450e-24t
Summit X450e-48t
Note
The Summit switches listed in each section of this chapter run ExtremeXOS software. For
information about compatible switches running ExtremeWare
Consolidated "i" and "e" Series Hardware Installation Guide.
EPS-160 External Power Module (with EPS-T)
The EPS-160 External Power Module (Model 10907) is a modular power supply for use with the EPS-T
chassis.
You can use the EPS-160 as a redundant power supply with the following Extreme Networks switches:
•
Summit X150-24t switch
•
Summit X150-24x switch
•
Summit X150-48t switch
•
Summit X250e-24t switch
•
Summit X250e-24x switch
•
Summit X250e-48t switch
•
Summit X450-24t switch
•
Summit X450-24x switch
The EPS-T is a rack-mountable chassis or tray that holds one or two EPS-160 power supplies. Each
EPS-160 power supply provides one-to-one redundancy for an attached Extreme Networks switch.
You can order the EPS-T chassis with one or two EPS-160 power supplies already installed. You can
also order an additional power supply from your Extreme Networks reseller.
The front of the EPS-160 unit has a green LED to indicate operating status, as explained in the table
below.
Summit Family Hardware Installation Guide
Compatible EPS
EPS-600LS External Power Module with EPS C chassis
or
Summit 750 W Power Supply with EPS-C2 chassis
EPS-500 External Power Supply Unit
EPS-500 External Power Supply Unit
Summit Power Supplies
Model Number
EPS-600LS: 10913
EPS-C: 10912
EPS-C2: 10936
Power supply: 10931
10911
10911
®
software, refer to the
123