Summit X350-24T Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

Power connectors on the rear panel of the switch include an AC power input socket and a redundant
power connector. The internal AC power supply operates from 100 VAC to 240 VAC. The switch
automatically adjusts to the supply voltage. The redundant power connector allows you to connect the
switch to the EPS-500 external power supply. When a compatible external power supply is used with
the Summit X350 series switch, the internal and external power supplies are fully fault tolerant and
load-sharing. If one power supply fails, the other power supply provides sufficient power to operate the
switch.
The Summit X350 series switches include the following models:
•

Summit X350-24t Switch

•
Summit X350-24t-TAA switch
•
Summit X350-48t Switch
•
Summit X350-48t-TAA switch
Note
In the descriptions that follow, references to a Summit X350 series model number also apply
to the equivalent TAA-compliant switch version.
Summit X350-24t Switch
The front panel of the Summit X350-24t switch includes:
•
Twenty fixed autosensing 10/100/1000BASE-T ports (ports 1–20) that provide 20 Gbps of high-
density copper connectivity
•
Four combination ports (ports 21-24) using RJ-45 connectors and SFPs to provide 4 Gbps of copper
or fiber connectivity
For more information about combination ports, see
For information about SFPS, see the Extreme Networks Pluggable Interface Modules Installation
Guide.
•
LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see
•
Serial console port used to connect a terminal and perform local management
Figure 23: Summit X350-24t Switch Front Panel
The rear panel of the Summit X350-24t switch (as shown in
Panel on page 36) includes:
Summit Family Hardware Installation Guide
Summit Family Switches
Combination Ports and Failover.
Summit X350 Series Switch
Figure 24: Summit X350-24t Switch Rear
LEDs.
35