Extreme Networks Summit X150 Series Hardware Installation Manual page 62

1 = AC power input connector
Summit X440-48p Switch
The front panel of the Summit X440-48p switch includes:
•
Forty-eight fixed autosensing 10/100/1000BASE-T PoE+ ports (ports 1–48). In addition to 48 Gbps
of high-density copper connectivity, these ports also provide a full 30 Watts of PoE+ per port. This
switch provides a total switch PoE power budget of 380 Watts.
•
Four unpopulated SFP ports (ports 45 – 48) that provide 4 Gbps of fiber connectivity. The SFP
ports support both 100BASE-FX and 1000BASE-X optical modules.
Ports 45 through 48 are implemented as shared ports that pair a copper port with a fiber port. For
more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation
Guide.
•
Ethernet management port
•
Serial console port implemented as an RJ-45 connector, used to connect a terminal and perform
local management
•
LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see
•
Stack number indicator
Figure 61: Summit X440-48p Switch Front Panel
1 = Ethernet management port
2 = 10/100/1000BASE-T PoE ports
3 = SFP ports
The rear panel of the Summit X440-48p switch
page 63) includes:
•
Two high-performance stacking ports with associated LEDs
•
Redundant power input connector for optional connection to the EPS-C2 External Power Module
The connecting redundant power supply cable is shipped with the power module. See
EPS-C2 Chassis
•
AC power input socket
Summit Family Hardware Installation Guide
for more information.
2 = Redundant power connector
Combination Ports and
Summit X440 Series Switch
4 = Stack number indicator
5 = Console port
6 = Combination ports
(Figure 62: Summit X440-48p Switch Rear Panel
Summit Family Switches
Failover.
LEDs.
on
Installing an
62