Summit X250E-24Tdc Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

Figure 8: Summit X250e-24t Switch Rear Panel

Summit X250e-24tDC Switch

The front panel of the Summit X250e-24tDC switch includes:
•
Twenty-four fixed autosensing 10/100BASE-T ports (ports 1–24) that provide 2.4 Gbps of high-
density copper connectivity
•
Two combination ports (ports 25–26) using RJ-45 connectors and SFPs to provide 2 Gbps of
copper or fiber connectivity
For more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation
Guide.
•
LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see
•
Stack number indicator showing the position of this switch in a stacked configuration
•
Serial console port used to connect a terminal and perform local management
Figure 9: Summit X250e-24tDC Switch Front Panel
The rear panel of the Summit X250e-24tDC switch (shown in
Rear Panel on page 24) includes:
•
Ethernet management port with associated LEDs
•
Two high-performance stacking ports with associated LEDs
•
Redundant power input connector for optional connection to the EPS-150DC External Power
Module (Model No. 10909).
Summit Family Hardware Installation Guide
Summit Family Switches
Combination Ports and Failover.
Summit X250e Series Switch
Figure 10: Summit X250e-24tDC Switch
LEDs.
23