Extreme Networks Summit X150 Series Hardware Installation Manual page 260

c Slide the spade terminal of the positive wire (–48 V RTN) under the captive square washer on
the positive terminal (labeled +).
Figure 237: Connecting the DC Power Cables (Part 1)
d Tighten both screws on the terminal block to 7 inch-pounds (0.99 Newton meters).
-48V
Summit Family Hardware Installation Guide
(+)
(–)
-48V
(+)
(–)
Installing Summit Family Switches
RTN
SH _ 161
RTN
SH _ 162
260