Combining Different Types Of Stacking Ports - Extreme Networks Summit X150 Series Hardware Installation Manual

Figure 155: SummitStack Configuration Using SummitStack X650 Series Switches and
SummitStack 40G Cables
The following figure shows an example of a four-switch stack that combines two Summit X650 series
switches and two Summit X460 series switches. In the Summit X650 series switches, the stacking ports
are on installed VIM1-SummitStack modules. In the Summit X460 series switches, the stacking ports are
on installed SummitStack stacking modules. The recommended order for connecting the stacking ports
is the same as for the example in SummitStack Cable Connections Using Eight Summit Switches with
Integrated SummitStack Ports.
Figure 156: SummitStack Configuration Using Summit X650 and X460 Series
Switches and SummitStack 40G Cables

Combining Different Types of Stacking Ports

Figure 157: Combining Stacking Port Types—A
following switches:
•
Summit X650 series switches with installed VIM1-SummitStack256 modules
•
Summit X450a series switch with integrated SummitStack ports
•
Summit X480 series switch with installed VIM2-SummitStack module
Summit Family Hardware Installation Guide
Slot 1
Slot 2
Slot 3
Slot 4
Slot 1
Slot 2
Slot 3
Slot 4
on page 187 shows a sample configuration using the
Building Stacks
186