Summit X250E-24T Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

•
Summit X250e-48p Switch
•
Summit X250e-48p-TAA switch
Note
In the descriptions that follow, references to a Summit X250e series model number also apply
to the equivalent TAA-compliant switch version.

Summit X250e-24t Switch

The front panel of the Summit X250e-24t switch includes:
•
Twenty-four fixed autosensing 10/100BASE-T ports (ports 1–24) that provide 2.4 Gbps of high-
density copper connectivity
•
Two combination ports (ports 25–26) using RJ-45 connectors and SFPs to provide 2 Gbps of
copper or fiber connectivity
For more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation
Guide.
•
LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see
•
Stack number indicator showing the position of this switch in a stacked configuration
•
Serial console port used to connect a terminal and perform local management.
Figure 7: Summit X250e-24t Switch Front Panel
The rear panel of the Summit X250e-24t switch (shown in
Panel on page 23) includes:
•
Ethernet management port with associated LEDs
•
Two high-performance stacking ports with associated LEDs
•
Redundant power input connector for optional connection to the EPS-160 External Power Module
The connecting redundant power supply cable is shipped with the EPS-160 unit. See
External Power Module (with EPS-T)
•
AC power input socket
The internal AC power supply operates from 100 VAC to 240 VAC.
Summit Family Hardware Installation Guide
Combination Ports and
Summit X250e Series Switch
Figure 8: Summit X250e-24t Switch Rear
for more information.
Summit Family Switches
Failover.
LEDs.
EPS-160
22