Removing A Summit X460 Ac Power Supply; Removing A Summit X460 Dc Power Supply - Extreme Networks Summit X150 Series Hardware Installation Manual

Removing a Summit X460 AC Power Supply

Caution
The power supply may be hot to the touch; wear thermal protective gloves when handling
the power supply during removal.
To remove a Summit X460 AC power supply:
1 Disconnect the AC power cord from the wall outlet and from the power supply.
2 Push the latching tab toward the power supply handle and pull outward on the handle to disengage
the power supply internal connectors.
Figure 348: Removing a Summit X460 AC Power Supply
750 W AC Power Supply
3 Carefully slide the power supply the rest of the way out of the switch.

Removing a Summit X460 DC Power Supply

To remove an installed Summit X460 DC power supply:
1 De-energize the DC circuit.
2 Disconnect the DC power cables as follows:
a Slide the cover off the terminal block.
b Loosen the screws that secure the cable terminals to the terminal block.
c Slide the wires out from under the captive washers.
3 Disconnect the ground wire as follows:
a Remove the screw that secures the ground wire to the power supply.
b Move the wire away from the power supply.
Summit Family Hardware Installation Guide
Removing a Summit Family Switch from a Rack
300 W AC Power Supply
362