Extreme Networks Summit X150 Series Hardware Installation Manual page 56

Figure 50: Summit X440-24t-10G Switch Rear Panel
1 = AC power input connector
Summit X440-24p-10G Switch
The front panel of the Summit X440-24p-10G switch includes:
•
Twenty-four fixed autosensing 10/100/1000BASE-T PoE+ ports (ports 1–24). In addition to 24 Gbps
of high-density copper connectivity, these ports also provide a full 30 Watts of PoE+ per port. This
switch provides a total switch PoE power budget of 380 Watts.
•
Four unpopulated SFP ports (ports 21–24) that provide 4 Gbps of fiber connectivity. The SFP ports
support both 100BASE-FX and 1000BASE-X optical modules.
Ports 21 through 24 are implemented as shared ports that pair a copper port with a fiber port. For
more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation
Guide.
•
Two unpopulated SFP+ ports (ports 25 and 26) that provide 20 Gbps of fiber connectivity
•
Ethernet management port
•
Serial console port implemented as an RJ-45 connector, used to connect a terminal and perform
local management
•
LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see
Figure 51: Summit X440-24p-10G Switch Front Panel
1 = Ethernet management port
2 = 10/100/1000BASE-T PoE ports
Summit Family Hardware Installation Guide
2 = Redundant power connector
Combination Ports and Failover.
Summit X440 Series Switch
5 = Console port
6 = Combination ports
Summit Family Switches
LEDs.
56