Extreme Networks Summit X150 Series Hardware Installation Manual page 256

3 If necessary, remove a blank panel from the back of the Summit X480 or X670 series switch.
Figure 233: Removing a Blank Panel
4 Verify that the power supply is right side up (see
256).
5 Carefully slide the power supply all the way into the power supply bay
DC Power Supply
6 Push the power supply in until the latch snaps into place.
Caution
Do not slam the power supply into the switch.
Figure 234: Installing a DC Power Supply
7 To install a second power supply, repeat steps 3 through 6.
Summit Family Hardware Installation Guide
on page 256 ).
Installing Summit Family Switches
SH _ 157
Figure 234: Installing a DC Power Supply
(seeFigure 234: Installing a
on page
256