Extreme Networks Summit X150 Series Hardware Installation Manual page 83

For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation
Guide.
•
LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see
Switch LEDs.
•
Serial console port used to connect a terminal and perform local management
Figure 84: Summit X450e-48t Switch Front Panel
The rear panel of the Summit X450e-48t switch
page 84) includes:
•
Slot for one of the Summit option cards listed in the following table. These port option cards allow
you to add one or two high-speed uplink ports to the switch.
Table 31: Port Option Cards for Summit X450e Series Switches
Option Card Model
XGM2-2xn option card
XGM2-2xf option card
XGM2-2sf option card
XGM2-2bt option card
•
Management port with associated LEDs
•
Two high-performance stacking ports with associated LEDs
•
Redundant power input connector for optional connection to the EPS-500 External Power Supply
Unit (Model No. 10911).
See EPS-500 External Power Supply Unit
supply cable is shipped with the EPS-500 power supply.
•
AC power input socket
The power supply operates from 100 VAC to 240 VAC.
Summit Family Hardware Installation Guide
(Figure 85: Summit X450e-48t Switch Rear Panel
Type of Added Ports
10-gigabit XENPAK modules
10-gigabit XFP modules
10-gigabit SFP+ modules
Fixed 10GBASE-T copper
for more information. The connecting redundant power
Summit Family Switches
Summit X450, X450a, and X450e Series
For More Information, see . . .
Summit XGM2-2xn Option Card
Summit XGM2-2xf Option Card
Summit XGM2-2sf Option Card
Summit XGM2-2bt Option Card
on
83