Extreme Networks Summit X150 Series Hardware Installation Manual page 42

•
Serial console port implemented as an RJ-45 connector, used to connect a terminal and perform
local management
•
LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see
1
MGMT
FAN
4
Figure 31: Summit X430-24p Switch Front Panel
1 = Ethernet management port
2 = 10/100/1000BASE-T POE+ ports
The rear panel of the Summit X430-24p switch (shown in
Panel on page 42) includes:
•
AC power input socket
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 32: Summit X430-24p Switch Rear Panel
1 = AC power input connector
Summit X430-48t Switch
The front panel of the Summit X430-48t switch includes:
•
Forty-eight fixed autosensing 10/100/1000BASE-T ports (ports 1–48) that provide 48 Gbps of high-
density copper connectivity.
•
Four 1000BASE-X SFP ports (ports 49–52) that provide 4 Gbps of fiber connectivity.
Note
All the forty-eight 10/100/1000BASE-T ports and all four of the 1000BASE-X SFP ports
can be used simultaneously.
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation
Guide.
Summit Family Hardware Installation Guide
2
25
26
27
28
X430-24p
Summit X430 LEDs.
3
25 26 27 28
3 = SFP ports
4 = Console port
Figure 32: Summit X430-24p Switch Rear
1
5.75A
Summit Family Switches
42