Ip Dhcp Relay Security Client Server-Id; Ip Dhcp Relay Server - Zte ZXR10 8900 Series Command Reference Manual

Syntax
Syntax
Description
Defaults
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Example
Related
Commands
Purpose
Command Modes
Syntax
ip dhcp relay information circuit-id <remote-id string>
no ip dhcp relay information circuit-id
<remote-id string>
Null, that is, the sub option of DHCP OPT82 remote-id is not con-
figured.
This example shows how to configure sub options of DHCP Relay
Option 82 remote-id.
ZXR10(config-if)#ip dhcp relay information remote-id "zxr10:vlan100:gei_1/1"
show ip dhcp relay information interface
ip dhcp relay security client
server-id
Use this command to configure the server-id address responded
from DHCP Relay to DHCP client. Use command no to cancel
server-id address responded from DHCP Relay to DHCP client.
Global configuration
ip dhcp relay security client server-id <ip-address>
no ip dhcp relay security client server-id
<ip-address>
This example describes how to configure server-id address as
192.200.100.254.
ZXR10(config)#ip dhcp relay security client server-id 192.200.100.254
ip dhcp relay agent
ip dhcp enable
show ip dhcp configure

ip dhcp relay server

Use this command to set the external DHCP server address of an
interface. Delete the address with the no command.
Interface configuration
ip dhcp relay server <ip-address>{standard | security}
no ip dhcp relay server <ip-address>
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 DHCP and DHCP SNOOPING Configuration
The string of option 82 circuit-id configured
by the user
the IP address of configured server-id,
decimalist format
91