Setting Address Range Resource - Zte ZXR10 8900 Series User Manual

Command
ZXR10_FW.define#host delete [id
<number1>][name <string>]
Parameter Description:
Parameter
delete
id
<number1>
name
<string>
Command Illustration:
To delete one host, it is available to delete the host according
to host name, host id or both. However, in case host id and
host name are inconsistent, host name shall apply.
When no parameter is given, the host not quoted by policy is
deleted.
Example:
To delete the host whose name is host1, execute the following
command:
ZXR10_FW.define# host delete name host1
5. Deleting all hosts not quoted by policy.
Command
ZXR10_FW.define#host clean
6. Viewing all hosts.
Command
ZXR10_FW.define#host show

Setting Address Range Resource

1. Adding address configuration range.
Command
ZXR10_FW.define#range add
name <string1> ip1 <string2> ip2
<string3>[except <string4>][session
<number1>]
Parameter Description:
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 Resource Management Configuration
Description
This deletes one host.
This specifies ID of the host to be deleted.
This is one number, indicating ID of host.
This specifies the name of host to be deleted.
This is one string, indicating name of the host.
Function
This deletes one host.
Function
This deletes all hosts
not quoted by policy.
Function
This views all hosts.
Function
This adds address
configuration range.
31