Configuring Acl; Configuring Time Range; Configuring Acl Rule - Zte ZXR10 5900 Series User Manual

ZXR10 5900/5200 Series User Manual (Basic Configuration Volume)
Command
time-range <timerange-name>{<hh:mm
ZXR10(config)#
:ss> to <hh:mm:ss><days-of-the-week>|from <hh:mm
:ss><mm-dd-yyyy>[to <hh:mm:ss><mm-dd-yyyy>]}
60 Confidential and Proprietary Information of ZTE CORPORATION
dress, TCP source port number, TCP destination port number,
UDP source port number, UDP destination port number.
� Standard IPv6ACL: Only match the IPv6 source IP address.
� Extended IPv6ACL: Only match the IPv6 source and destination
IP address.
Each ACL has an access list number to identify. The access list
number is a number. The access list number ranges of different
types of ACLs are shown as follows:
� standard ACL: 1~99
�
Extended ACL: 100~199
� L2 ACL : 200~299
� Hybrid ACL: 300~349
� Standard IPv6ACL: 2000~2499
� Extended IPv6ACL : 2500~2999
Each ACL has at best 100 rules, with the rule number range from
1 to 100.

Configuring ACL

Configuring Time Range

There are several conditions in time-range configuration.
� Configure time range for each day: Specify the exact start time
and end time in a day.
� Configure period range: Specify the period to be a fixed day
of a week.
� Configure date range: Specify start date and end date. If not
configured, the start date is the day when configuration takes
effect and the end date is the max day that system can identify.

Configuring ACL Rule

When configuring ACL, it is needed to enter ACL configuration
mode firstly and then define ACL rules. The following items shall
be noted when defining ACL rules:
Function
This enables time range.