ZXR10 8900 Series Command Reference (MPLS)
Related
commands
Purpose
Command Modes
Syntax
Instructions
Example
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Related
Commands
Purpose
30
Confidential and Proprietary Information of ZTE CORPORATION
show mpls ldp discovery
mpls ldp style
Ue this command to adopt a new keepalive mechanism of LDP
sessions. Once a hello packet is received, reset the keepalive time
of the session this hello packet maintains.
Global configuration
mpls ldp style
no mpls ldp style
By default, ZXROS updates the keepalive timer of sessions when-
ever it receives each LDP TCP packet. After the configuration of
this command, the timer will be reset whenever each LDP PDU
packet (including TCP and UDP packets) is received.
This example describes how to enable the new keepalive mecha-
nism of LDP sessions.
ZXR10(config)#mpls ldp style
mpls ldp target-session
Use this command to configure the address of the indirect remote
target session and establish the target session. To delete the ses-
sion, use the no form of this command.
Global configuration
mpls ldp target-session <ip-address>
no mpls ldp target-session <ip-address>
<ip-address>
This command is supported after the platform version 4.6.02.
This example describes how to establish a target session with the
router whose router identifier is 1.1.1.1.
ZXR10(config)#mpls ldp target-session 1.1.1.1
show mpls ldp neighbor
mpls xconnect
Use this command to configure the address, VPWS identifier, and
tunnel number of the remote interface. The creation of VPWS is
IP address or router identifier of the remote
neighbor