Enable Authorization Attributes - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Format
show authentication ports {<portlist>}
Parameters
<portlist> - (Optional) Specify to display compound authentication on specific port(s).
Restrictions
None.
Example
To display the authentication settings for ports 1 to 3:
DGS-3420-28SC:admin#show authentication ports 1-3
Command: show authentication ports 1-3
Port Methods
---- -------------- ----------- ----------------------
1 None
2 None
3 None
DGS-3420-28SC:admin#

18-10 enable authorization attributes

Description
This command is used to enable the authorization global state.
Format
enable authorization attributes
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Auth Mode Authentication VLAN(s)
Host-based
Host-based
Host-based
237