3.2.5.8 Removing the DETECTOR ASSY., HP
1. Remove the PRINTER MECHANISM from the HOUSING ASSY., LOWER (see Section 3,2.4).
2, Remove the clips from the rear side of the FRAME, MAIN, BASE that hold the
Remove the DETECTOR
3.2.5.9 Removing the DETECTOR ASSY., PE, REAR
1. Remove the PRINTER MECHANISM from the HOUSING ASSY., LOWER (see Section 3.2.4).
2. Remove the two CBP(C) (M3 X 10) screws that hold the COVER, PLATEN, LOWER to the frame. Remove
the COVER, PLATEN, LOWER.
3. Remove the clips that hold the
DETECTOR ASSY., PE, REAR .
Figure 3-24. Removing the DETECTOR ASSY., PE, REAR
Figure 3-23. Removing the DETECTOR ASSY., HP
DETECTOR
DETECTOR ASSY., PE, REAR
DETECTOR ASSY.,
HP
3-17
REV.-B
DETECTOR