Paper Supply Faults; Dot Missing 1; Dot Missing 2 - Epson Stylus C82 Service Manual

Color inkjet printer
Hide thumbs Also See for Stylus C82:
Table of Contents

Advertisement

EPSON Stylus C82
3.
Fatal Error Reference Information (Aside from Head Hot Error)
Fatal Error cause can be analyzed by referring to EEPROM Address and Error
Code shown below.
Table 3-2. [2Dh address: Sequence error]
Address
Error Condition
00h
No error
01h
Memory free error
02h
Board hot/cold error
03h
DRAM error
04h
Timer IC initialize error
Table 3-3. [2Eh address: DC motor error]
Address
Error Condition
00h
No error
01h to 0Ch CR motor control error
When printer cannot detect Ink Out, a Head Hot Error is handled
as a Fatal Error and displayed. Because of this, the printer makes
every effort to automatically recover from Ink Out Error without
expecting that the existing Ink Cartridge had to have been
replaced.

3.1.1.4 Paper Supply Faults

1.
Use a cleaning sheet to clean the Retard Roller and LD Roller inside the ASF Unit.
(See "Chapter 6 Maintenance" for details.)
2.
Clean the Retard Roller or LD Roller with a cloth moistened with a cleaning
solution like alcohol.
3.
Replace the Retard Roller or LD Roller. (It is recommended that both be replaced
at the same time.)
TROUBLESHOOTING
Address
Error Condition
05h
Mechanism edge detection error
06h
CR home seeking 1 error
07h
CR home seeking 2 error
08h
CR lock retry error
09h to 0Ch Motor sequence error
Address
Error Condition
FBh to FFh PF motor control error

3.1.1.5 Dot missing 1

1.
Use operation from Panel or Driver Utility to execute cleaning 4~5 times.
2.
Use Adjustment Program to execute strongest cleaning 2~3 times.
3.
Use Adjustment Program to execute Ink Charge.
4.
Allow printer to sit for one day and check printing again the next day. If problem
continues, replace the Printhead.

3.1.1.6 Dot missing 2

When a specific single dot is missing only with color printing and cannot be recovered,
check whether or not the Stylus C80 Printer Driver is being used. With the Stylus C82,
59 nozzles are used for each color nozzle, so 1 dot will be missing if the Stylus C80
Printer Driver is used.
Overview
Revision A
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents