Dhcp Server With Option 184 Support Configuration Example - H3C S5600 Series Operation Manual

Hide thumbs Also See for H3C S5600 Series:

Table of Contents

Operation Manual – DHCP

H3C S5600 Series Ethernet Switches

[SwitchA-dhcp-pool-1] expired day 10 hour 12

[SwitchA-dhcp-pool-1] nbns-list 10.1.1.4

[SwitchA-dhcp-pool-1] quit

# Configure DHCP address pool 2, including address range, gateway and lease time.

[SwitchA] dhcp server ip-pool 2

[SwitchA-dhcp-pool-2] network 10.1.1.128 mask 255.255.255.128

[SwitchA-dhcp-pool-2] expired day 5

[SwitchA-dhcp-pool-2] gateway-list 10.1.1.254

2.10.2 DHCP Server with Option 184 Support Configuration Example

I. Network requirements

A 3COM VCX device operating as a DHCP client requests the DHCP server for all

sub-options of Option 184. An H3C series switch operates as the DHCP server. The

Option 184 support function is configured for a global DHCP address pool. The

sub-options of Option 184 are as follows:

NCP-IP: 3.3.3.3

AS-IP: 2.2.2.2

Voice VLAN configuration: voice VLAN: enabled; voice VLAN ID: 3

Fail-over routing: IP address: 1.1.1.1; dialer string: 99*

II. Network diagram

Figure 2-2 Network diagram for Option 184 support configuration

III. Configuration procedure

Configure the DHCP client.

Configure the 3COM VCX device to operate as a DHCP client and to request for all

sub-options of Option 184. (Configuration process omitted)

Configure the DHCP server.

# Enter system view.

IP:10.1.1.1/24

Chapter 2 DHCP Server Configuration

Table of Contents