Operation Manual – SSH
H3C S5600 Series Ethernet Switches
Figure 1-28 SSH client configuration interface (2)
Click Browse... to bring up the file selection window, navigate to the private key file and
click OK.
5)
From the window shown in
you will be prompted to enter the username.
1.7.5 When Switch Acts as Client for Password Authentication
I. Network requirements
As shown in
and Switch B (SSH Server) for secure data exchange. The user name for login is
client001 and the SSH server's IP address is 10.165.87.136. Password authentication
is required.
II. Network diagram
Figure 1-29 Switch acts as client for password authentication
Figure
Figure
1-29, establish an SSH connection between Switch A (SSH Client)
1-28, click Open. If the connection is normal,
1-45
Chapter 1 SSH Configuration