H3C S5600 Series Operation Manual page 694

Operation Manual – VRRP
H3C S5600 Series Ethernet Switches
The master is connected to the upstream network through its GigabitEthernet
1/0/1 port. The backup is connected to the upstream network through its
GigabitEthernet 1/0/2 port.
The virtual router IP address of the VRRP group is 10.100.10.1.
Enable the port tracking function on GigabitEthernet 1/0/1 port of the master and
specify that the priority of the master decreases by 50 when GigabitEthernet 1/0/1
port fails, which triggers new master being determined in the VRRP group 1.
II. Network diagram
Virtual IP address
202.38.160.111/24
Figure 1-6 Network diagram for VRRP port tracking configuration
III. Configuration procedure
Configure the master switch.
# Enter system view.
<Sysname> system-view
# Create VLAN 3.
[Sysname] vlan 3
[Sysname-vlan3] port GigabitEthernet1/0/1
[Sysname-vlan3] quit
# Configure VLAN-interface 3.
[Sysname] interface Vlan-interface 3
[Sysname-Vlan-interface3] ip address 10.100.10.2 255.255.255.0
[Sysname-Vlan-interface3] quit
# Create VLAN 2.
[Sysname] vlan 2
Vlan-int3
10.100.10. 2/24
Master
Actual IP address
Vlan-int2
202.38.160. 1/24
Network
Backup
Layer 2 Switch
1-20
Chapter 1 VRRP Configuration
Virtual IP address
202.38.160.111/24
Actual IP address
Vlan-int2
202.38.160.2/24