H3C S5820X Series Oaa Command Reference
Hide thumbs
Also See for S5820X Series:
- Command reference manual (488 pages) ,
- Configuration manual (252 pages) ,
- High availability configuration manual (233 pages)
Subscribe to Our Youtube Channel
Related Manuals for H3C S5820X Series
Summary of Contents for H3C S5820X Series
- Page 1 H3C S5820X&S5800 Switch Series OAA Command Reference Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Software version: Release 1211 Document version: 6W100-20110415...
- Page 2 SecPro, SecPoint, SecEngine, SecPath, Comware, Secware, Storware, NQA, VVG, V G, V G, PSPT, XGbus, N-Bus, TiGem, InnoVision and HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd. All other trademarks that may be mentioned in this manual are the property of their respective owners Notice The information in this document is subject to change without notice.
- Page 3 Preface The H3C S5800&S5820X documentation set includes 12 command references, which describe the commands and command syntax options for the S5800&S5820X Release1211. The OAA Command Reference describes OAA configuration commands. This preface includes: Audience • Added and modified commands •...
- Page 4 An alert that calls attention to essential information. IMPORTANT An alert that contains additional or supplementary information. NOTE An alert that provides helpful information. About the H3C S5800&S5820X documentation set The H3C S5800&S5820X documentation set includes: Category Documents Purposes Marketing brochures Describe product specifications and benefits.
- Page 5 Interface Cards User available for the products. Manual Describes the benefits, features, hardware H3C OAP Cards User specifications, installation, and removal of the OAP Manual cards available for the products. H3C Low End Series...
- Page 6 Guides you through installing SFP/SFP+/XFP Transceiver Modules transceiver modules. Installation Guide • S5800-60C-PWR Switch Video Installation Guide Shows how to install the H3C S5800-60C-PWR and • H3C S5820X-28C Ethernet switches. S5820X-28C Switch Video Installation Guide Describe software features and configuration Configuration guide procedures.
- Page 7 Obtaining documentation You can access the most up-to-date H3C product documentation on the World Wide Web at http://www.h3c.com. Click the links on the top navigation bar to obtain different categories of product documentation: [Technical Support & Documents > Technical Documents] –...
-
Page 8: Table Of Contents
Contents OAP card configuration commands ··························································································································· 1 oap connect ······························································································································································1 oap reboot ································································································································································2 ACFP configuration commands··································································································································· 3 acfp server enable····················································································································································3 display acfp client-info ·············································································································································3 display acfp policy-info············································································································································5 display acfp rule-info················································································································································7 display acfp server-info············································································································································9 ACSEI configuration commands ·······························································································································11 acsei client close···················································································································································· 11 acsei client reboot ·················································································································································... -
Page 9: Oap Card Configuration Commands
OAP card configuration commands oap connect Syntax oap connect slot slot-number system system-name View User view Default level 2: System level Parameters slot slot-number: Specifies an OAP card on a member device of an Intelligent Resilient Framework (IRF) virtual device. The slot-number argument takes the member ID of the member of the IRF virtual device, and its value ranges depend on the number of member devices and there member IDs. -
Page 10: Oap Reboot
oap reboot Syntax oap reboot slot slot-number system system-name View User view Default level 2: System level Parameters slot slot-number: Restart the software system of an OAP card on a member of an IRF virtual device. The slot-number argument takes the member ID of the member of the IRF virtual device, and its value ranges depend on the number of member devices and there member IDs. -
Page 11: Acfp Configuration Commands
ACFP configuration commands acfp server enable Syntax acfp server enable undo acfp server enable View System view Default level 2: System level Parameters None Description Use the acfp server enable command to enable the ACFP server. Use the undo acfp server enable command to disable the ACFP server. By default, the ACFP server is disabled. - Page 12 Parameters client-id: Displays information of the specified ACFP client, where client-id is the ACFP client identifier, in the range of 1 to 2147483647. |: Filters command output by specifying a regular expression. For more information about regular expressions, see CLI configuration in the Configuration Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow.
-
Page 13: Display Acfp Policy-Info
display acfp policy-info Syntax display acfp policy-info [ client client-id [ policy-index ] | dest-interface interface-type interface-number | in-interface interface-type interface-number | out-interface interface-type interface-number ] [ active | inactive ] [ | { begin | exclude | include } regular-expression ] View Any view Default level... - Page 14 xamples # Display the information about the effective policies for all the packets that use GigabitEthernet 1/0/1 as the inbound interface. <Sysname> display acfp policy-info in-interface gigabitethernet 1/0/1 active ACFP policy total number: 1 ClientID: Policy-Index: Rule-Num: ContextID: 2007 Exist-Time: 100000(s) Life-Time: 864000(s)
-
Page 15: Display Acfp Rule-Info
display acfp rule-info Syntax display acfp rule-info { in-interface [ interface-type interface-number ] | out-interface [ interface-type interface-number ] | policy [ client-id policy-index ] } [ | { begin | exclude | include } regular-expression ] View Any view Default level 1: Monitor level Parameters... - Page 16 PackRate:128 Kbps Action:rate Status:active OperationStatus:succeeded # Display ACFP rule information in order of policy. <Sysname> display acfp rule-info policy 1 1 ACFP Rule total number: 1 ClientID:1 Policy-Index:1 Rule-Index:1 SIP:192.168.132.122 SMask:0.0.0.255 SPort:65500 to 65535 DIP:192.168.112.115 DMask:0.0.0.255 DPort:65500 to 65535 Protocol:ipinip Fragment:false DSCP:AF11 Action:redirect...
-
Page 17: Display Acfp Server-Info
Field Description The value is six bits, which represents URG, ACK, PSH, RST, SYN, and TCPFlag FIN respectively from low to high. The value is six bits, which represents URG mask, ACK mask, PSH mask, RST mask, SYN mask, and FIN mask respectively from low to high. TCPMask For each bit, the value 1 indicates that this bit is concerned, and the value 0 indicates that this bit is not concerned. - Page 18 Table 4 Output description Field Description ACFP client working mode supported by the ACFP server: • Server-Info redirect: redirect mode • mirror: mirror mode Maximum expiration time (in seconds) of the collaboration policy Max Life-Time supported by the server PersistentRules Whether the server supports permanent collaboration rules.
-
Page 19: Acsei Configuration Commands
ACSEI configuration commands acsei client close Syntax acsei client close client-id View ACSEI server view Default level 2: System level Parameters client-id: ID of the ACSEI client to be closed. An ACSEI client ID is assigned by the ACSEI server, which ranges from 1 to 10. -
Page 20: Acsei Server
acsei server Syntax acsei server View System view Default level 2: System level Parameters None Description Use the acsei server command to enter ACSEI server view. Examples # Enter ACSEI server view. <Sysname> system-view [Sysname] acsei server [Sysname-acsei-server] acsei server enable Syntax acsei server enable undo acsei server enable... -
Page 21: Acsei Timer Clock-Sync
acsei timer clock-sync Syntax acsei timer clock-sync minutes undo acsei timer clock-sync View ACSEI server view Default level 2: System level Parameters minutes: Value of the synchronization timer that is used for clock synchronization from ACSEI server to ACSEI client. It ranges from 0 to 1440 (in minutes), where value 0 specifies to disable the clock synchronization from ACSEI server to ACSEI client. -
Page 22: Display Acsei Client Info
By default, the monitoring timer is set to 5 seconds. Examples # Set the monitor timer for ACSEI server to monitor ACSEI client to 6 seconds. <Sysname> system-view [Sysname] acsei server [Sysname-acsei-server] acsei timer monitor 6 display acsei client info Syntax display acsei client info [ client-id ] [ | { begin | exclude | include } regular-expression ] View... - Page 23 Bootrom Version: 1.12 CF card: 256 MB Memory: 512 MB Harddisk: 40.0 GB # Display information about all ACSEI clients. <Sysname> display acsei client info Total Client Number: 2 Client ID: 1 Client Description: Hardware: System Software: Application Software: CPU: Intel(R) Pentium(R) M processor 1.40GHz PCB Version: 3.00 CPLD Version: 1.00 Bootrom Version: 1.12...
-
Page 24: Display Acsei Client Summary
Field Description CF card CF card information of the ACSEI client Memory Memory information of the ACSEI client Harddisk Harddisk information of the ACSEI client display acsei client summary Syntax display acsei client summary [ client-id ] [ | { begin | exclude | include } regular-expression ] View Any view Default level... - Page 25 Status: Open MAC Address: 00e0-fc0a-c3ef Interface: GigabitEthernet5/0 Last registered: 02/08/2007 12:00:00 Client ID: 2 Status: Open MAC Address: 00e0-fa1e-03da Interface: GigabitEthernet6/0 Last registered: 02/08/2007 13:00:00 Table 6 Output description Field Description Client ID ID of the ACSEI client Status ACSEI client status MAC Address MAC address of the ACSEI client Interface...
-
Page 26: Index
Index A D O display acfp client-info,3 display acfp policy-info,5 acfp server enable,3 display acfp rule-info,7 acsei client close,1 1 display acfp server-info,9 acsei client reboot,1 1 display acsei client info,14 acsei server,12 display acsei client summary,16 acsei server enable,12 acsei timer clock-sync,13 acsei timer...
Need help?
Do you have a question about the S5820X Series and is the answer not in the manual?
Questions and answers