Displaying And Maintaining Acl Configuration; Examples For Upper-Layer Software Referencing Acls; Example For Controlling Telnet Login Users By Source Ip - H3C S5600 Series Operation Manual

Operation Manual – ACL
H3C S5600 Series Ethernet Switches
To do...
Enter system view
Apply ACL rules to a
VLAN
III. Configuration example
# Apply ACL 2000 in the inbound direction of VLAN 1 to filter packets.
<Sysname> system-view
[Sysname] packet-filter vlan 1 inbound ip-group 2000

1.3 Displaying and Maintaining ACL Configuration

Display a configured ACL
or all the ACLs
Display a time range or all
the time ranges
Display information about
packet filtering
Display information about
ACL resources

1.4 Examples for Upper-layer Software Referencing ACLs

1.4.1 Example for Controlling Telnet Login Users by Source IP

I. Network requirements
Apply an ACL to permit users with the source IP address of 10.110.100.52 to telnet to
the switch.
Use the command...
system-view
packet-filter vlan vlan-id
inbound acl-rule
To do...
display acl { all | acl-number }
display time-range { all |
time-name }
display packet-filter { interface
interface-type interface-number |
unitid unit-id }
display drv-module qacl
qacl_resource
—
Required
For information about acl-rule,
refer to ACL Commands.
Use the command...
1-13
Chapter 1 ACL Configuration
Remarks
Remarks
Available in any
view