H3C S5600 Series Operation Manual page 630

Operation Manual – AAA
H3C S5600 Series Ethernet Switches
To do...
Set the IP address
and port number of
the secondary
RADIUS accounting
server
Enable
stop-accounting
request buffering
Set the maximum
number of
transmission
attempts of a
buffered
stop-accounting
request.
Set the maximum
allowed number of
continuous real-time
accounting failures
Use the command...
secondary
accounting ip-address
[ port-number ]
stop-accounting-buffe
r enable
retry stop-accounting
retry-times
retry
realtime-accounting
retry-times
2-15
Chapter 2 AAA Configuration
Remarks
Optional
By default, the IP address and
UDP port number of the
secondary accounting server are
0.0.0.0 and 1813 for a newly
created RADIUS scheme.
Optional
By default, stop-accounting
request buffering is enabled.
Optional
By default, the system tries at
most 500 times to transmit a
buffered stop-accounting request.
Optional
By default, the maximum allowed
number of continuous real-time
accounting failures is five. If five
continuous failures occur, the
switch cuts down the user
connection.