H3C S5600 Series Operation Manual page 687

Operation Manual – VRRP
H3C S5600 Series Ethernet Switches
II. Network diagram
10.100.10.2/24
LSW A
Vlan-int2
202.38.160.1/24
Figure 1-3 Network diagram for single-VRRP group configuration
III. Configuration procedure
Configure Switch A.
# Configure VLAN 3.
<LSW-A> system-view
[LSW-A] vlan 3
[LSW-A-vlan3] port GigabitEthernet1/0/10
[LSW-A-vlan3] quit
[LSW-A] interface Vlan-interface 3
[LSW-A-Vlan-interface3] ip address 10.100.10.2 255.255.255.0
[LSW-A-Vlan-interface3] quit
# Configure VLAN 2.
[LSW-A] vlan 2
[LSW-A-vlan2] port GigabitEthernet 1/0/6
[LSW-A-vlan2] quit
[LSW-A] interface Vlan-interface 2
[LSW-A-Vlan-interface2] ip address 202.38.160.1 255.255.255.0
[LSW-A-Vlan-interface2] quit
# Enable a VRRP group to respond to ping operations destined for its virtual router IP
address.
[LSW-A] vrrp ping-enable
Host B
10.2.3.1/24
Internet
Vlan-int3
Virtual IP address
202.38.160.111/24
202.38.160.3/24
Host A
Vlan-int3
10.100.10.3/24
LSW B
Vlan-int2
202.38.160.2/24
1-13
Chapter 1 VRRP Configuration