Udp Test (Udpprivate Test) On The Specified Ports - H3C S5600 Series Operation Manual

Operation Manual – HWPing
H3C S5600 Series Ethernet Switches
HWPing entry(admin administrator, tag tcpprivate) test result:
Destination ip address:10.2.2.2
Send operation times: 10
Min/Max/Average Round Trip Time: 4/7/5
Square-Sum of Round Trip Time: 282
Last complete test time: 2000-4-2 8:26:2.9
Extend result:
SD Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0
System busy operation number: 0
Operation sequence errors: 0
Other operation errors: 0
[Sysname-hwping-administrator-tcpprivate]
administrator tcpprivate
HWPing entry(admin administrator, tag tcpprivate) history record:
Index
10
For detailed output description, see the corresponding command manual.

1.3.8 UDP Test (Udpprivate Test) on the Specified Ports

I. Network requirements
Both the HWPing client and the HWPing server are H3C S5600 series Ethernet
switches. Perform a HWPing Udpprivate test on the specified ports between the two
switches to test the RTT of UDP packets between this end (HWPing client) and the
specified destination end (HWPing server).
Response Status
1 4
2 5
3 4
4 5
5 4
6 5
7 6
8 7
9 5
7
Chapter 1 HWPing Configuration
Receive response times: 10
DS Maximal delay: 0
Operation timeout number: 0
Connection fail number: 0
Drop operation number: 0
display
LastRC
1 0 2000-04-02 08:26:02.9
1 0 2000-04-02 08:26:02.8
1 0 2000-04-02 08:26:02.8
1 0 2000-04-02 08:26:02.7
1 0 2000-04-02 08:26:02.7
1 0 2000-04-02 08:26:02.6
1 0 2000-04-02 08:26:02.6
1 0 2000-04-02 08:26:02.5
1 0 2000-04-02 08:26:02.5
1 0 2000-04-02 08:26:02.4
1-34
hwping history
Time