H3C S5600 Series Operation Manual page 1073

Operation Manual – FTP-SFTP-TFTP
H3C S5600 Series Ethernet Switches
Enter system view
Enable an SFTP server
II. Configuring connection idle time
After the idle time is configured, if the server does not receive service requests from a
client within a specified time period, it terminates the connection with the client, thus
preventing a user from occupying the connection for a long time without performing any
operation.
Follow these steps to configure connection idle time:
Enter system view
Configure the connection
idle time for the SFTP
server
III. Supported SFTP client software
An H3C S5600 series Ethernet switch operating as an SFTP server can interoperate
with SFTP client software, including SSH Tectia Client v4.2.0 (SFTP), v5.0, and
WINSCP.
SFTP client software supports the following operations: logging in to a device;
uploading a file; downloading a file; creating a directory; modify a file name or a
directory name; browsing directory structure; and manually terminating a connection.
For configurations on client software, see the corresponding configuration manual.
To do...
system-view
sftp server enable
To do...
system-view
ftp timeout
time-out-value
Chapter 1 FTP and SFTP Configuration
Use the command...
Use the command...
1-18
Remarks
—
Required
Disabled by default.
Remarks
—
Optional
10 minutes by default.